Building Standards approved: According to building supervision approval, the use of customary threaded rods in steel grades 5.8 and zinc-plated 8.8 as well as A4 stainless steel with factory test according to 3.1 is expressly permitted. Approved for the following injection (composite) mortars from our selection. - FAKKT injection system VMU 345 + 300 approval ETA-06/0120 for non-cracked concrete M 10 - M 16. - FAKKT injection system VMU 345 + 300 approval DIBt Z-21.3-1804 for perforated brick and masonry M 8 - M 12. - Fischer FIS V 360 S approval ETA-02/0024 for non-cracked concrete M 8 - M 16. - Fischer FIS V 360 S approval ETA-10/0383 for perforated brick, masonry and aerated concrete M 8 – M 16. - Fischer FIS SB 360 S approval ETA-12/0258 for cracked concrete M 8 - M 30. In accordance with the approval, it is also permitted to cut these anchor rods to the appropriate length. We offer the FAKKT VMU anchor rods or the Fischer FIS A anchor rods in various diameters and lengths as pre-cut anchor rods. |
Type: Threaded rods in zinc-plated steel grade 8.8 and stainless steel A4 with works test certificate in cut to the meter lengths3.1. |