Building Standards approved: European Technical Approval, Option 7, non-cracked concrete M 6 to M 30, approval no. ETA-02/0024 for galvanically zinc-plated steel, stainless steel A4 and HCR 1.4529. Approval no. Z-21.3-1824 for solid and perforated masonry M 6 to M 16 and aerated concrete. M 8 to M 12. Galvanically zinc-plated anchor rods and stainless steel A4 as well as the approval ETA-10/0383 for many additional new types of stone. |
Application: The Fischer FIS V HIGH SPEED injection mortar based on vinyl ester resin is used to fasten medium-weight to heavy objects in masonry, solid and perforated brick, aerated concrete, lime sand, solid and perforated masonry as well as in non-cracked concrete. The two resin and hardener components are first mixed when they leave the cartridge. In this way, the remaining content of the cartridge continues to function. It is only necessary to screw on a new mixing tube after long interruptions. |
Properties: The Fischer FIS V HIGH SPEED injection mortar is based on styrene-free vinyl ester resin. Free of expansion pressure, for small axial and edge spacing. Each mortar cartridge comes with 2 mixing tubes. Thanks to the special formula, the mortar can also be used at extreme winter temperatures of -15 °C. At warmer temperatures, a shorter processing time must be taken into account. |
Installation instruction: The boreholes are to be cleaned thoroughly with a blower (item no.: 62034) and cleaning brush. A gun with 2 plungers (item no.: 6203531 or item no.: 620356) is required for dispensing. |
Advantages: - quicker curing and resilience - hardly any limitations at cold temperatures - also approved for the use of customary threaded rods with factory test 3.1 |
Unfortunately, the item is no longer available.