Building Standards approved: Approved in conjunction with Fischer FIS V injection mortar and Fischer FIS A anchor rods for use in perforated brick. The galvanized FIS H L cut by the meter is not included in the approval. |
Application: The Fischer FIS H anchor sleeves are used when injecting Fischer injection mortar into perforated brick. |
Properties: The FIS H anchor sleeves prevent the mortar from moving into the chambers of the perforated masonry. Centering blades (only for the FIS H K plastic design) on the inside of the sleeve permit the use of different anchor rod diameters and center them in the sleeve. The metal FIS H L cut by the meter can be individually customized if need be. |
Installation instruction: The sieve sleeves is filled from the anchor base. The mixing tube is slowly pulled out of the anchor sleeve during dispensing. Please refer to the information below for the filling quantity. |