Building Standards approved:
European Technical Approval, Option 1, cracked concrete M 8 - M 24, approval no. ETA-04/0092 for galvanically zinc-plated steel, hot-dip galvanized, stainless steel A4 and HCR 1.4529. |
Application:
In conjunction with the VMZ-A anchor rods, the MKT VMZ injection mortar is used to fasten heavy objects in cracked concrete. Main areas of application include metal structures, facade substructures, noise barriers, bridge railings according to GEL 14, baluster attachment according to GEL 33, and much more. |
Properties:
The MKT injection system VMZ comprises an anchor rod with tapered expansion elements and a 2-component injection mortar. This combination brings together the advantages of composite dowels and expansion dowels in an approved fastening system for cracked and non-cracked concrete and ensures small axial and edge spacing. Push-through installation is possible starting from M 10. Undiminished load carrying capacity in wet and, from M 12 onward, in water filled boreholes. |
Installation instruction:
The boreholes are to be cleaned thoroughly with a blower and brush. Installation only permitted with torque wrench. The two resin and hardener components are first mixed when they leave the cartridge. In this way, the remaining content of the cartridge continues to function. It is only necessary to screw on a new mixing tube after long interruptions. |
Advantages:
- low concrete component thicknesses
- high load carrying capacity in cracked concrete |
Language
Fastening technology
in stock
