Keller & Kalmbach Online-Shop si rivolge esclusivamente alle imprese
Product range Fastening technology Concrete screws Heco Multi-Monti screw anchor, countersunk head Heco Multi-Monti screw anchor, countersunk head, Stainless steel A4

Heco Multi-Monti screw anchor, countersunk head, Stainless steel A4

Building Standards approved: 
European Technical Approval, Option 1, cracked concrete 7,5 -10 - 12 - 14 and 16 mm approval no. ETA-05/0010 for galvanically zinc-plated steel. European Technical Approval, Option 1, cracked concrete 7,5 – 10 and 12 mm approval no. ETA-05/0011 for stainless steel A4. Building Standards Approval, approval no. Z-21.1-1503 (galvanized) and Z-21.1-1697 (stainless steel A4), 6 – 7,5 and 10 mm for anchoring light ceiling coverings and suspended ceilings in concrete.
Application: 
The Multi Monti screw anchors are used to fasten light to heavy objects in concrete. Suitable for non approval-related fasteners in many other materials such as brick, natural stone, solid brick and sand-lime brick. Main application areas include fasteners in all areas of housing technology, interior design, but also temporary fasteners such as shuttering props or core drills.
Properties: 
Multi-Monti screw anchors are based on a completely new operating principle. The threaded flanks undercut the concrete, giving rise to positive locking anchoring. Free of expansion pressure, resulting in small axial and edge spacing. No curing times, can be loaded immediately. Completely detachable. Short installation times, very economical, in particularly the comparably very inexpensive stainless steel design. Push-through installation possible.
Advantages: 
- no tightening torque necessary
- positive locking anchoring
- reusable with non approval-related anchors
- setting and installation in one work step

Article information
Surface blank
 
Heco Logo
Multi-Monti Mauerschraube, Senkkopf Edelstahl
Note: 
Clean borehole thoroughly .
*The dimension 6 x 40 is not included in the approval. The dimensions 6 x 50 and 7,5 x 50 correspond to the Building Standards Approval Z-21.1-1503. All other dimensions correspond to the approval ETA-05/0010 and ETA-05/0011.
Width across flats Ø 7,5 mm = SW 13,Ø 10 mm = SW 16, Ø 12 mm = SW 18, Ø 14 mm = SW 21 mm,
Ø 16 mm = SW 24 mm.
Screw drive for countersunk and round head screws Ø 5mm = TX 20,
Ø 6 mm = TX 30, Ø 7,5 mm = TX 40.The screw tip is made of hardened, phosphated steel and is attributable to the minimum anchoring depth.
Zulassung HECO Zulassund Heco ETA-05_0011 F120 Rostfrei-Logo_en
Heco Multi-Monti Schraubanker Zulassung ETA-05_0010 Heco Multi-Monti Schraubanker Zulassung ETA-05_0010
Heco Multi-Monti Schraubanker Zulassung ETA-05_0011 Heco Multi-Monti Schraubanker Zulassung ETA-05_0011
Heco Multi-Monti Schraubanker Zulassung Z-21_1-1503 Heco Multi-Monti Schraubanker Zulassung Z-21_1-1503
Heco Multi-Monti Schraubanker Zulassung Z-21_1-1697 Heco Multi-Monti Schraubanker Zulassung Z-21_1-1697
Select Material
Stainless steel A4
Material: Stainless steel A4
Type Dimension Drilling diameter Anchoring depth Clamping range Price per100 Piece Packing unit  
MMS-F 7,5 x 75/10 7.5 x 75/10 mm 6 mm 65 mm 10 mm al dettaglio prodotti (Prezzo dopo la registrazione) 50 Artikel ansehen
 
Anteprima di stampa
Keller & Kalmbach GmbH • Siemensstraße 19 • 85716 Unterschleißheim • Telefon 089/83 95-0 • info@keller-kalmbach.com